Smart Ecosystem Aquarium – LED Light with Autonomous Light Cycle: Troubleshooting Guide

The LED lighting system in your Smart Ecosystem Aquarium is designed to replicate a natural reef day–night cycle, supporting coral growth and fish wellbeing while keeping operation effortless. Each unit comes pre-programmed by Living Oceans with optimised dawn, daylight, and dusk phases — no setup is required.

If power is turned off, the light will not lose its program. When power is restored, it automatically returns to the correct point in the lighting cycle based on the time of day, ensuring your aquarium stays on schedule without any need for adjustment.

To maintain best performance:

  • Use voice control for quick colour changes — always remember to return to schedule, refer to the section “Voice Control Function” below.
  • Keep the light surface clean with a soft, dry cloth to prevent salt build-up.
  • Avoid changing the pre-set schedule to maintain natural coral balance.
  • If you need to restore your light settings, refer to the section “Restoring Light Settings” below.

Voice Control Function

Your LED light also includes voice control for quick, hands-free operation.
Simply say the command clearly after waking the device with “Hey Lena.”

Available voice commands:

  • “Hey Lena, turn the light on.”
  • “Hey Lena, turn the light off.”
  • “Hey Lena, change colour.”
  • “Hey Lena, return to schedule.”

Voice control allows you to make instant changes without interrupting the programmed lighting cycle. Always remember to return to schedule after using voice commands.

For the full list of commands, refer to your Smart Ecosystem Aquarium Manual.

Restoring Light Settings

Your light has been pre-programmed by Living Oceans to deliver the correct lighting spectrum and duration for your specific model.

In the rare case that you need to restore these settings, follow the steps below.

  1. Download the Control App
    • Install the Netlea V2 App on your smartphone (available for iOS and Android).
    • Open the App → tap Add Device → select Bluetooth → enable Display newly powered devices only.
  2. Connect to Your Light
    • Select your light when it appears.
    • Tap Confirm Connection.
    • Change the mode to Natural to activate the Living Oceans preset schedule.
  3. Enter the Following Settings
    • Dawn (8 – 11 am) – Moon 3 (all models)
    • Daylight (11 am – 7 pm)
      • SEA 80L: R2, W2, G1, B15
      • SEA 130L: R2, W2, G1, B20
      • SEA 200L: R2, W2, G1, B25
    • Dusk (7 – 9 pm) – Moon 3 (all models)

PAR Surface ≈ 250 µMol | PAR Sand ≈ 50 µMol

  1. Submit Schedule
    • Tap Submit Schedule to confirm.
    • Disconnect Bluetooth once complete.

 

Troubleshooting

  • Light not responding to voice commands
    • Ensure the unit is powered on and connected to Wi-Fi.
    • Speak clearly and closer to the microphone area.
    • Voice control operates best within 5 m in a quiet environment.
  • Light not appearing in App
    • Confirm Bluetooth is enabled and the light is powered.
    • Restart the App and re-scan for devices.
  • Colour looks incorrect
    • Open the App → verify Natural Mode → re-submit the schedule.

Need More Help?

If your light is still not operating as expected, contact Living Oceans Support at
📧 support@livingoceans.com.au

Please include:

  • Your aquarium model (e.g. SEA 80L, SEA 130L, SEA 200L)
  • A short description of the issue
  • Steps you’ve already taken
  • Photos or short video if relevant

Our team will assist with diagnostics or arrange replacement parts if required.